Metal weight calculators / Aluminium combinations
Metal by dimension. Mass by calculation.
Aluminum Angle Weight Calculator
Calculate aluminum angle weight from actual dimensions, density and quantity. Read kg, lb and applicable unit weights, with an optional material-cost estimate.
Your material & dimensions
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
A = t(B + H − t); mass = density × A × length.
Calculate aluminum angle weight from actual dimensions, density and quantity. Read kg, lb and applicable unit weights, with an optional material-cost estimate.
- Select a material reference, shape and a consistent dimension unit.
- Confirm metal density, actual dimensions and whether a nominal source preset applies.
- Submit the form, then interpret the result with the assumptions and limits below.
Fabricated sharp-corner angle estimate. For rolled IS 808 ISA sections use the sourced nominal-mass tool. All dimensions are nominal or user supplied; use a scale or certified product data for shipping, billing and final procurement.
Aluminium / Aluminum Angle: dimensions, density and unit-weight formula
Aluminium / Aluminum starts at 2700 kg/m³. Elemental aluminium reference. Alloy, temper, product tolerances and surface layers can change the actual mass. Reference basis: Elemental aluminium at/near room temperature.
Two rectangular legs share a square corner. Subtract the overlap once. Equal and unequal legs can be entered, but root fillets and rounded toes are not described by the sharp-corner area.
For aluminum angle weight, keep a single physical piece definition: separate lengths, product counts and voids before multiplying. Convert dimensions consistently; millimetre volume scales by 10⁻⁹ to m³, while cubic inches use 0.0254³. Nominal designation and measured dimension are different inputs. Verify the drawing or product specification before interpreting a calculated total.
Continue with: Aluminum Block Weight Calculator · Aluminum Busbar Weight Calculator · Aluminum Channel Weight Calculator · Aluminum Checker Plate Weight Calculator
Check the numbers
Aluminum Angle Weight Calculator: calculated examples
These results are calculated from the dimensions or published-mass records stated in each row. They are not a complete inventory, certified tolerance table or structural design.
Worked example with stated inputs
Material density reference = Aluminium / Aluminum; Shape = Angle; Dimension units = Millimetres (mm); Density (editable override) = 2700 kg/m³; First leg outside size = 75 mm; Second leg outside size = 75 mm; Uniform leg thickness = 6 mm; Piece / sidewall length = 1000 mm; Quantity = 1 pieces; Optional unit price (0 = omit) = 0 ; Price basis = Price per kg; Cost currency label = USD.
| Output | Computed result |
|---|---|
| Single-piece calculated mass | 2.3328 kg |
| Single-piece mass | 5.142944 lb |
| Quantity | 1 pieces |
| Total mass | 2.3328 kg |
| Total mass in pounds | 5.142944 lb |
| Linear mass | 2.3328 kg/m |
| Linear mass in imperial units | 1.567569 lb/ft |
| Net model metal volume | 0.000864 m³ |
| Selected shape | Angle |
| Material reference | Aluminium / Aluminum |
| Density entered | 2,700 kg/m³ |
| Calculation basis | Geometry × supplied density |
Dimensioned weight examples in kg
| Scenario | Dimension set / calculation basis | Result |
|---|---|---|
| 500 mm | Piece / sidewall length | 1.1664 kg |
| 750 mm | Piece / sidewall length | 1.7496 kg |
| 1000 mm | Piece / sidewall length | 2.3328 kg |
| 1500 mm | Piece / sidewall length | 3.4992 kg |
| 2000 mm | Piece / sidewall length | 4.6656 kg |
| 3000 mm | Piece / sidewall length | 6.9984 kg |
Unchanged inputs use: Material density reference = Aluminium / Aluminum; Shape = Angle; Dimension units = Millimetres (mm); Density (editable override) = 2700 kg/m³; First leg outside size = 75 mm; Second leg outside size = 75 mm; Uniform leg thickness = 6 mm; Piece / sidewall length = 1000 mm; Quantity = 1 pieces; Optional unit price (0 = omit) = 0 ; Price basis = Price per kg; Cost currency label = USD. Results retain the model limitations described above.
Common questions
What density does this material weight calculator use?
Aluminium / Aluminum starts at 2700 kg/m³. Elemental aluminium reference. Alloy, temper, product tolerances and surface layers can change the actual mass. Reference basis: Elemental aluminium at/near room temperature.
What is the aluminum angle weight calculation formula?
A = t(B + H − t); mass = density × A × length. The initial density is 2700 kg/m³ for Elemental aluminium at/near room temperature. The dimensioned examples on this page show the resulting piece mass; quantity and optional unit price are applied separately.
Are aluminum and aluminium different materials?
They are US and international spellings of the same element. Alloy and temper designations still matter: a generic aluminum preset is not a density certificate for every casting or wrought alloy.
How do I calculate weight in kg and lbs?
The dimensional model gives metal volume in m³, multiplied by the entered kg/m³ density. One avoirdupois pound is exactly 0.45359237 kg. The result reports kg and lb; these are mass units, while force weight would require a gravitational acceleration.
Can I get weight per meter and per foot?
Uniform bars, pipes and section-area models report kg/m and lb/ft. One foot is exactly 0.3048 m. Area and nonuniform objects instead use their stated geometry; a sphere or coil does not have a meaningful generic straight-stock kg/m.
Can this calculate unequal angle weight?
Yes for uniform thickness and sharp corners. Use actual leg dimensions and a consistent thickness.
Why does it differ from an ISA weight chart?
Rolled sections include root and toe geometry plus nominal production conventions. This simple geometry is not a substitute for the published section mass.
Can I export this calculation to Excel?
Calculate first, then choose Export CSV. The CSV contains the submitted model and inputs plus piece mass, total mass and applicable unit weights. Excel can open this text format; it is not a downloadable formula workbook or desktop application.
Does optional price include shipping or fabrication?
No. Enter a price per kg or per lb in the chosen currency label. The total is material mass times that unit price only, with no exchange-rate lookup, tax, minimum order, cutting loss or fabrication labor.
How should I read the calculated tables?
Each table states its geometry, material density and assumptions. Example dimensions are calculation scenarios unless explicitly identified as sourced nominal presets. They are not an inventory list or tolerance guarantee.
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, certified tolerances or proprietary performance ratings.
- OpenStax College Physics 2e, 11.2 Density: mass, volume and density relationshiphttps://openstax.org/books/college-physics-2e/pages/11-2-density
- NIST SP 811, Appendix B.9: mass, length and derived-unit conversionshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9
- NIST SRD 71 Users Guide, Table A.3: elemental solids at/near room temperaturehttps://www.nist.gov/system/files/documents/srd/SRD71UsersGuideV1-2.pdf