Metal Weight CalculatorMaterials, shapes & unit weights

Metal weight calculators / Copper alloys combinations

Metal by dimension. Mass by calculation.

Brass Plate Weight Calculator

Calculate brass plate weight from actual dimensions, density and quantity. Read kg, lb and applicable unit weights, with an optional material-cost estimate.

Your material & dimensions

kg/m³
mm
mm
mm
pieces

Preset densities are editable reference estimates. Dimensions use the selected mm/in unit. Published kg/m presets use their source mass directly; choose Custom dimensions to edit their geometry. Initial inputs are examples.

Reset

Your result

Ready to calculate

Enter your values and press Calculate. The result will open on the calculation page.

Published references · Clear assumptions · No sign-up

The method

Formula and calculation steps

V = width × thickness × length; mass = density × V.

Calculate brass plate weight from actual dimensions, density and quantity. Read kg, lb and applicable unit weights, with an optional material-cost estimate.

  1. Select a material reference, shape and a consistent dimension unit.
  2. Confirm metal density, actual dimensions and whether a nominal source preset applies.
  3. Submit the form, then interpret the result with the assumptions and limits below.

Rectangular solid only; no holes, coatings, tolerances or cutting losses are automatic. All dimensions are nominal or user supplied; use a scale or certified product data for shipping, billing and final procurement.

Brass Plate: dimensions, density and unit-weight formula

Brass starts at 8530 kg/m³. Uses C26000 cartridge brass as a named example. Other brass compositions need a different density. Reference basis: C26000 cartridge brass representative.

Use the actual rectangular dimensions. Width, thickness and cut length all contribute independently to the volume. A plate is not the same as its bounding box once holes, notches or welded attachments are present.

For brass plate weight, keep a single physical piece definition: separate lengths, product counts and voids before multiplying. Convert dimensions consistently; millimetre volume scales by 10⁻⁹ to m³, while cubic inches use 0.0254³. Nominal designation and measured dimension are different inputs. Verify the drawing or product specification before interpreting a calculated total.

Check the numbers

Brass Plate Weight Calculator: calculated examples

These results are calculated from the dimensions or published-mass records stated in each row. They are not a complete inventory, certified tolerance table or structural design.

Worked example with stated inputs

Material density reference = Brass; Shape = Plate; Dimension units = Millimetres (mm); Density (editable override) = 8530 kg/m³; Width = 1000 mm; Base / wall thickness = 6 mm; Piece / sidewall length = 1000 mm; Quantity = 1 pieces; Optional unit price (0 = omit) = 0 ; Price basis = Price per kg; Cost currency label = USD.

OutputComputed result
Single-piece calculated mass51.18 kg
Single-piece mass112.832586 lb
Quantity1 pieces
Total mass51.18 kg
Total mass in pounds112.832586 lb
Linear mass51.18 kg/m
Linear mass in imperial units34.391372 lb/ft
Projected area mass51.18 kg/m²
Projected area mass in imperial units10.48249 lb/ft²
Net model metal volume0.006 m³
Selected shapePlate
Material referenceBrass
Density entered8,530 kg/m³
Calculation basisGeometry × supplied density

Dimensioned weight examples in kg

ScenarioDimension set / calculation basisResult
500 mmPiece / sidewall length25.59 kg
750 mmPiece / sidewall length38.385 kg
1000 mmPiece / sidewall length51.18 kg
1500 mmPiece / sidewall length76.77 kg
2000 mmPiece / sidewall length102.36 kg
3000 mmPiece / sidewall length153.54 kg

Unchanged inputs use: Material density reference = Brass; Shape = Plate; Dimension units = Millimetres (mm); Density (editable override) = 8530 kg/m³; Width = 1000 mm; Base / wall thickness = 6 mm; Piece / sidewall length = 1000 mm; Quantity = 1 pieces; Optional unit price (0 = omit) = 0 ; Price basis = Price per kg; Cost currency label = USD. Results retain the model limitations described above.

Common questions

What density does this material weight calculator use?

Brass starts at 8530 kg/m³. Uses C26000 cartridge brass as a named example. Other brass compositions need a different density. Reference basis: C26000 cartridge brass representative.

What is the brass plate weight calculation formula?

V = width × thickness × length; mass = density × V. The initial density is 8530 kg/m³ for C26000 cartridge brass representative. The dimensioned examples on this page show the resulting piece mass; quantity and optional unit price are applied separately.

How do I calculate weight in kg and lbs?

The dimensional model gives metal volume in m³, multiplied by the entered kg/m³ density. One avoirdupois pound is exactly 0.45359237 kg. The result reports kg and lb; these are mass units, while force weight would require a gravitational acceleration.

Can I get weight per meter and per foot?

Uniform bars, pipes and section-area models report kg/m and lb/ft. One foot is exactly 0.3048 m. Area and nonuniform objects instead use their stated geometry; a sphere or coil does not have a meaningful generic straight-stock kg/m.

Can I use a sheet gauge instead of thickness?

Enter its verified decimal thickness. Steel, galvanized, stainless and nonferrous gauge systems differ; a bare gauge number has no universal millimetre equivalent.

Is this the delivered or theoretical weight?

It is theoretical mass from stated nominal or measured dimensions. Mill tolerances and order packaging can change the scale reading.

Can I export this calculation to Excel?

Calculate first, then choose Export CSV. The CSV contains the submitted model and inputs plus piece mass, total mass and applicable unit weights. Excel can open this text format; it is not a downloadable formula workbook or desktop application.

Does optional price include shipping or fabrication?

No. Enter a price per kg or per lb in the chosen currency label. The total is material mass times that unit price only, with no exchange-rate lookup, tax, minimum order, cutting loss or fabrication labor.

How should I read the calculated tables?

Each table states its geometry, material density and assumptions. Example dimensions are calculation scenarios unless explicitly identified as sourced nominal presets. They are not an inventory list or tolerance guarantee.

Formula sources and references

References support the underlying methods and units. Chosen example inputs are not universal recommendations, certified tolerances or proprietary performance ratings.

  • OpenStax College Physics 2e, 11.2 Density: mass, volume and density relationshiphttps://openstax.org/books/college-physics-2e/pages/11-2-density
  • NIST SP 811, Appendix B.9: mass, length and derived-unit conversionshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9
  • Copper Development Association: architectural alloys, C26000 densityhttps://copper.org/publications/pub_list/pdf/A4039-ArchitecturalApplications.pdf