Metal Weight CalculatorMaterials, shapes & unit weights

Metal weight calculators / Steel combinations

Metal by dimension. Mass by calculation.

Carbon Steel Angle Weight Calculator

Calculate carbon steel angle weight from actual dimensions, density and quantity. Read kg, lb and applicable unit weights, with an optional material-cost estimate.

Your material & dimensions

kg/m³
mm
mm
mm
mm
pieces

Preset densities are editable reference estimates. Dimensions use the selected mm/in unit. Published kg/m presets use their source mass directly; choose Custom dimensions to edit their geometry. Initial inputs are examples.

Reset

Your result

Ready to calculate

Enter your values and press Calculate. The result will open on the calculation page.

Published references · Clear assumptions · No sign-up

The method

Formula and calculation steps

A = t(B + H − t); mass = density × A × length.

Calculate carbon steel angle weight from actual dimensions, density and quantity. Read kg, lb and applicable unit weights, with an optional material-cost estimate.

  1. Select a material reference, shape and a consistent dimension unit.
  2. Confirm metal density, actual dimensions and whether a nominal source preset applies.
  3. Submit the form, then interpret the result with the assumptions and limits below.

Fabricated sharp-corner angle estimate. For rolled IS 808 ISA sections use the sourced nominal-mass tool. All dimensions are nominal or user supplied; use a scale or certified product data for shipping, billing and final procurement.

Carbon Steel Angle: dimensions, density and unit-weight formula

Carbon Steel starts at 7850 kg/m³. Carbon steels cover multiple compositions and conditions; this is a structural-steel estimating basis. Reference basis: Representative structural steel.

Two rectangular legs share a square corner. Subtract the overlap once. Equal and unequal legs can be entered, but root fillets and rounded toes are not described by the sharp-corner area.

For carbon steel angle weight, keep a single physical piece definition: separate lengths, product counts and voids before multiplying. Convert dimensions consistently; millimetre volume scales by 10⁻⁹ to m³, while cubic inches use 0.0254³. Nominal designation and measured dimension are different inputs. Verify the drawing or product specification before interpreting a calculated total.

Check the numbers

Carbon Steel Angle Weight Calculator: calculated examples

These results are calculated from the dimensions or published-mass records stated in each row. They are not a complete inventory, certified tolerance table or structural design.

Worked example with stated inputs

Material density reference = Carbon Steel; Shape = Angle; Dimension units = Millimetres (mm); Density (editable override) = 7850 kg/m³; Dimension / published-mass preset = Custom dimensions; First leg outside size = 75 mm; Second leg outside size = 75 mm; Uniform leg thickness = 6 mm; Piece / sidewall length = 1000 mm; Quantity = 1 pieces; Optional unit price (0 = omit) = 0 ; Price basis = Price per kg; Cost currency label = USD.

OutputComputed result
Single-piece calculated mass6.7824 kg
Single-piece mass14.952632 lb
Quantity1 pieces
Total mass6.7824 kg
Total mass in pounds14.952632 lb
Linear mass6.7824 kg/m
Linear mass in imperial units4.557562 lb/ft
Net model metal volume0.000864 m³
Selected shapeAngle
Material referenceCarbon Steel
Density entered7,850 kg/m³
Calculation basisGeometry × supplied density

Dimensioned weight examples in kg

ScenarioDimension set / calculation basisResult
ISA 50 x 50 x 5Published nominal kg/m × 1 m3.79 kg
ISA 60 x 60 x 6Published nominal kg/m × 1 m5.4 kg
ISA 75 x 75 x 6Published nominal kg/m × 1 m6.86 kg

Unchanged inputs use: Material density reference = Carbon Steel; Shape = Angle; Dimension units = Millimetres (mm); Density (editable override) = 7850 kg/m³; Dimension / published-mass preset = Custom dimensions; First leg outside size = 75 mm; Second leg outside size = 75 mm; Uniform leg thickness = 6 mm; Piece / sidewall length = 1000 mm; Quantity = 1 pieces; Optional unit price (0 = omit) = 0 ; Price basis = Price per kg; Cost currency label = USD. Results retain the model limitations described above.

Common questions

What density does this material weight calculator use?

Carbon Steel starts at 7850 kg/m³. Carbon steels cover multiple compositions and conditions; this is a structural-steel estimating basis. Reference basis: Representative structural steel.

What is the carbon steel angle weight calculation formula?

A = t(B + H − t); mass = density × A × length. The initial density is 7850 kg/m³ for Representative structural steel. The dimensioned examples on this page show the resulting piece mass; quantity and optional unit price are applied separately.

How do I calculate weight in kg and lbs?

The dimensional model gives metal volume in m³, multiplied by the entered kg/m³ density. One avoirdupois pound is exactly 0.45359237 kg. The result reports kg and lb; these are mass units, while force weight would require a gravitational acceleration.

Can I get weight per meter and per foot?

Uniform bars, pipes and section-area models report kg/m and lb/ft. One foot is exactly 0.3048 m. Area and nonuniform objects instead use their stated geometry; a sphere or coil does not have a meaningful generic straight-stock kg/m.

Can this calculate unequal angle weight?

Yes for uniform thickness and sharp corners. Use actual leg dimensions and a consistent thickness.

How are the sourced size presets different from custom geometry?

A dimensional preset supplies published nominal OD and wall. A published-mass preset uses its source kg/m directly and ignores density for that mass. Select Custom dimensions for the simple geometric estimate. These two bases can differ because of fillets, manufacturing conventions and catalogue rounding.

Why does it differ from an ISA weight chart?

Rolled sections include root and toe geometry plus nominal production conventions. This simple geometry is not a substitute for the published section mass.

Can I export this calculation to Excel?

Calculate first, then choose Export CSV. The CSV contains the submitted model and inputs plus piece mass, total mass and applicable unit weights. Excel can open this text format; it is not a downloadable formula workbook or desktop application.

Does optional price include shipping or fabrication?

No. Enter a price per kg or per lb in the chosen currency label. The total is material mass times that unit price only, with no exchange-rate lookup, tax, minimum order, cutting loss or fabrication labor.

How should I read the calculated tables?

Each table states its geometry, material density and assumptions. Example dimensions are calculation scenarios unless explicitly identified as sourced nominal presets. They are not an inventory list or tolerance guarantee.

Formula sources and references

References support the underlying methods and units. Chosen example inputs are not universal recommendations, certified tolerances or proprietary performance ratings.

  • OpenStax College Physics 2e, 11.2 Density: mass, volume and density relationshiphttps://openstax.org/books/college-physics-2e/pages/11-2-density
  • NIST SP 811, Appendix B.9: mass, length and derived-unit conversionshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9
  • SSAB structural hollow sections EPD: steel densityhttps://websitecdn.ssab.com/-/media/Files/EN/Support/Certificates/Hollow-Sections/Environmental-product-declaration---EN-EPD-SSAB-tubes-sections-piles.pdf
  • SAIL: Structurals from SAIL, Product Range; Printed page 9: Conventional Structurals, ISMB, ISMC and ISAhttps://www.sail.co.in/sites/default/files/product-brochure/2023-10/PFS-Brochure_New-2023.pdf
  • Bureau of Indian Standards: IS 808:2021 scope summary; IS 808:2021 Hot Rolled Steel Beam, Column, Channel and Angle Sections — Dimensions and Propertieshttps://www.services.bis.gov.in/tmp/tbl5_2024-11-11-05-24.pdf