Metal Weight CalculatorMaterials, shapes & unit weights

Metal weight calculators / Shapes

Metal by dimension. Mass by calculation.

Section Area Weight Calculator

Calculate section area weight from actual dimensions, density and quantity. Read kg, lb and applicable unit weights, with an optional material-cost estimate.

Your material & dimensions

kg/m³
mm²
mm
pieces

Preset densities are editable reference estimates. Dimensions use the selected mm/in unit. Published kg/m presets use their source mass directly; choose Custom dimensions to edit their geometry. Initial inputs are examples.

Reset

Your result

Ready to calculate

Enter your values and press Calculate. The result will open on the calculation page.

Published references · Clear assumptions · No sign-up

The method

Formula and calculation steps

Mass = metal section area × cut length × density.

Calculate section area weight from actual dimensions, density and quantity. Read kg, lb and applicable unit weights, with an optional material-cost estimate.

  1. Select a material reference, shape and a consistent dimension unit.
  2. Confirm metal density, actual dimensions and whether a nominal source preset applies.
  3. Submit the form, then interpret the result with the assumptions and limits below.

Requires a verified material area; does not derive arbitrary profiles, rolled-section properties or safe loads. All dimensions are nominal or user supplied; use a scale or certified product data for shipping, billing and final procurement.

Section Area: dimensions, density and unit-weight formula

Select a stated alloy rather than assuming every metal or every steel grade has one density. The material selector contains source-scoped reference estimates and a custom-density choice. The bottom references identify the underlying manufacturer, association or government data.

Use the actual metal cross-section area from a supplier or a validated drawing. It includes fillets, hollows and extrusion details when those are already included in the area. A bounding rectangle or outer silhouette is not necessarily the metal area.

For section area weight, keep a single physical piece definition: separate lengths, product counts and voids before multiplying. Convert dimensions consistently; millimetre volume scales by 10⁻⁹ to m³, while cubic inches use 0.0254³. Nominal designation and measured dimension are different inputs. Verify the drawing or product specification before interpreting a calculated total.

Check the numbers

Section Area Weight Calculator: calculated examples

These results are calculated from the dimensions or published-mass records stated in each row. They are not a complete inventory, certified tolerance table or structural design.

Worked example with stated inputs

Material density reference = Steel; Shape = Section Area; Dimension units = Millimetres (mm); Density (editable override) = 7850 kg/m³; Published / measured metal cross-section area = 1000 mm²; Piece / sidewall length = 1000 mm; Quantity = 1 pieces; Optional unit price (0 = omit) = 0 ; Price basis = Price per kg; Cost currency label = USD.

OutputComputed result
Single-piece calculated mass7.85 kg
Single-piece mass17.306288 lb
Quantity1 pieces
Total mass7.85 kg
Total mass in pounds17.306288 lb
Linear mass7.85 kg/m
Linear mass in imperial units5.274956 lb/ft
Net model metal volume0.001 m³
Selected shapeSection Area
Material referenceSteel
Density entered7,850 kg/m³
Calculation basisGeometry × supplied density

Dimensioned weight examples in kg

ScenarioDimension set / calculation basisResult
Steel7850 kg/m³; identical stated dimensions7.85 kg
SS 3047900 kg/m³; identical stated dimensions7.9 kg
Aluminium / Aluminum2700 kg/m³; identical stated dimensions2.7 kg
Copper8960 kg/m³; identical stated dimensions8.96 kg
Brass8530 kg/m³; identical stated dimensions8.53 kg
Titanium4506 kg/m³; identical stated dimensions4.506 kg

Unchanged inputs use: Material density reference = Steel; Shape = Section Area; Dimension units = Millimetres (mm); Density (editable override) = 7850 kg/m³; Published / measured metal cross-section area = 1000 mm²; Piece / sidewall length = 1000 mm; Quantity = 1 pieces; Optional unit price (0 = omit) = 0 ; Price basis = Price per kg; Cost currency label = USD. Results retain the model limitations described above.

Common questions

What density does this metal weight calculator use?

Select a stated alloy rather than assuming every metal or every steel grade has one density. The material selector contains source-scoped reference estimates and a custom-density choice. The bottom references identify the underlying manufacturer, association or government data.

What is the section area weight calculation formula?

Mass = metal section area × cut length × density. Select the actual material density or enter a verified override. The dimensioned examples on this page show the resulting piece mass; quantity and optional unit price are applied separately.

How do I calculate weight in kg and lbs?

The dimensional model gives metal volume in m³, multiplied by the entered kg/m³ density. One avoirdupois pound is exactly 0.45359237 kg. The result reports kg and lb; these are mass units, while force weight would require a gravitational acceleration.

Can I get weight per meter and per foot?

Uniform bars, pipes and section-area models report kg/m and lb/ft. One foot is exactly 0.3048 m. Area and nonuniform objects instead use their stated geometry; a sphere or coil does not have a meaningful generic straight-stock kg/m.

Can I use a standard section area from a catalogue?

Yes, provided its units, metal grade and definition are correct. Published nominal kg/m can differ slightly because area and mass may be independently rounded.

What about an aluminum extrusion or conductor cable?

Enter the sum of its true metal areas. Separate different materials, voids and insulation, and account for nonstraight lay paths when applicable.

Can I export this calculation to Excel?

Calculate first, then choose Export CSV. The CSV contains the submitted model and inputs plus piece mass, total mass and applicable unit weights. Excel can open this text format; it is not a downloadable formula workbook or desktop application.

Does optional price include shipping or fabrication?

No. Enter a price per kg or per lb in the chosen currency label. The total is material mass times that unit price only, with no exchange-rate lookup, tax, minimum order, cutting loss or fabrication labor.

How should I read the calculated tables?

Each table states its geometry, material density and assumptions. Example dimensions are calculation scenarios unless explicitly identified as sourced nominal presets. They are not an inventory list or tolerance guarantee.

Formula sources and references

References support the underlying methods and units. Chosen example inputs are not universal recommendations, certified tolerances or proprietary performance ratings.

  • OpenStax College Physics 2e, 11.2 Density: mass, volume and density relationshiphttps://openstax.org/books/college-physics-2e/pages/11-2-density
  • NIST SP 811, Appendix B.9: mass, length and derived-unit conversionshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9
  • SSAB structural hollow sections EPD: steel densityhttps://websitecdn.ssab.com/-/media/Files/EN/Support/Certificates/Hollow-Sections/Environmental-product-declaration---EN-EPD-SSAB-tubes-sections-piles.pdf
  • Ovako Steel Navigator: 42CrMo4, typical other propertieshttps://steelnavigator.ovako.com/steel-grades/42crmo4/pdf?variantIDs=53
  • Uddeholm Rigor: AISI A2 physical data at 20 Chttps://www.voestalpine.com/highperformancemetals/pl/app/uploads/sites/249/productdb/api/tech_uddeholm-rigor_en.pdf
  • FErrox: 51CrV4 (1.8159) material propertieshttps://www.ferrox-group.com/en/materials/nitriding-steel/51crv4-1-8159.html
  • Uddeholm Sverker 21: AISI D2 physical data at 20 Chttps://www.voestalpine.com/highperformancemetals/denmark/app/uploads/sites/249/productdb/api/tech_uddeholm-sverker-21_en.pdf
  • Uddeholm Orvar Supreme: Superior AISI H13 physical datahttps://www.uddeholm.com/app/uploads/sites/247/2024/09/Tech-Uddeholm-Orvar-Supreme-EN.pdf
  • Euro Inox: Stainless Steel Tables of Technical Properties, 2007, physical properties pp. 16-17https://worldstainless.org/wp-content/uploads/2025/02/Tables_TechnicalProperties_EN.pdf
  • ATI 410/420/425 Mod/440A/440C technical datasheet, annealed physical propertieshttps://www.atimaterials.com/Products/Documents/datasheets/stainless-specialty-steel/martensitic/ati_410_420_425_mod_440a_440c_tds_en4_v2.pdf
  • SSAB metal-coated steel sheets EPD: steel substrate and separate zinc coatinghttps://vpp.bastaonline.se/Documents/510965/EPD/EPD-Metal_coated_steel_sheets_and_coils.pdf
  • NIST SRD 71 Users Guide, Table A.3: elemental solids at/near room temperaturehttps://www.nist.gov/system/files/documents/srd/SRD71UsersGuideV1-2.pdf
  • thyssenkrupp Materials UK: aluminium density by alloyhttps://www.thyssenkrupp-materials.co.uk/density-of-aluminium.html
  • Copper Development Association: architectural alloys, C26000 densityhttps://copper.org/publications/pub_list/pdf/A4039-ArchitecturalApplications.pdf
  • Copper Development Association: cast copper alloy sleeve bearings, density tablehttps://www.copper.org/publications/pub_list/pdf/sleevebearing_a1063_06.pdf
  • Copper Development Association: C51000 physical propertieshttps://alloys.copper.org/alloy/C51000
  • Copper Development Association: C95400 physical propertieshttps://alloys.copper.org/alloy/C95400
  • Dura-Bar Density technical brief, gray-iron example 0.260 lb/in3https://dura-bar.com/getmedia/811341e6-6541-48f9-b719-1d1d666a2bc8/dura-bar-density-0219.pdf?ext=.pdf
  • Iplex Irontite ductile pipe: material density/specific gravityhttps://www.iplex.com.au/products/metals/irontite-ductile-pipe
  • Special Metals: High-Performance Alloys for Resistance to Aqueous Corrosion, Table 2https://www.specialmetals.com/documents/aqueous-corrosion-handbook.pdf
  • Haynes International: HASTELLOY C-22 physical propertieshttps://haynesintl.com/en/alloys/alloy-portfolio/corrosion-resistant-alloys/hastelloy-c-22/
  • Haynes International: HASTELLOY C-276 physical propertieshttps://haynesintl.com/wp-content/uploads/2024/09/c-276.pdf
  • Haynes International: HASTELLOY X physical propertieshttps://haynesintl.com/en/alloys/alloy-portfolio/high-temperature-alloys/hastelloy-x/
  • Special Metals: MONEL alloy 400, physical constants Table 2https://www.specialmetals.com/documents/technical-bulletins/monel-alloy-400.pdf
  • NIH PubChem: periodic-table density data, leadhttps://pubchem.ncbi.nlm.nih.gov/periodic-table/density/
  • Plansee Group: tungsten reference densityhttps://plansee-group.com/en/company/tungsten
  • CoorsTek: tungsten carbide ACI-Co6 typical propertieshttps://www.coorstek.com/media/4255/tungsten-carbide.pdf