Metal weight calculators / Other metals combinations
Metal by dimension. Mass by calculation.
Lead Sphere Weight Calculator
Calculate lead sphere weight from actual dimensions, density and quantity. Read kg, lb and applicable unit weights, with an optional material-cost estimate.
Your material & dimensions
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
V = πd³/6; mass = density × V.
Calculate lead sphere weight from actual dimensions, density and quantity. Read kg, lb and applicable unit weights, with an optional material-cost estimate.
- Select a material reference, shape and a consistent dimension unit.
- Confirm metal density, actual dimensions and whether a nominal source preset applies.
- Submit the form, then interpret the result with the assumptions and limits below.
Solid sphere only; cavities, drilled bores and casting shrinkage are excluded. All dimensions are nominal or user supplied; use a scale or certified product data for shipping, billing and final procurement.
Lead Sphere: dimensions, density and unit-weight formula
Lead starts at 11340 kg/m³. Rounded from the elemental density of 11.342 g/cm3. Antimonial and other lead alloys need separate data. Reference basis: Elemental lead, rounded.
A solid sphere uses diameter cubed, so doubling the diameter increases theoretical mass by eight. A hollow ball requires a shell calculation rather than this solid formula.
For lead sphere weight, keep a single physical piece definition: separate lengths, product counts and voids before multiplying. Convert dimensions consistently; millimetre volume scales by 10⁻⁹ to m³, while cubic inches use 0.0254³. Nominal designation and measured dimension are different inputs. Verify the drawing or product specification before interpreting a calculated total.
Continue with: Lead Sheet Weight Calculator · Lead Volume Weight Calculator · Magnesium Plate Weight Calculator · Titanium Pipe Weight Calculator
Check the numbers
Lead Sphere Weight Calculator: calculated examples
These results are calculated from the dimensions or published-mass records stated in each row. They are not a complete inventory, certified tolerance table or structural design.
Worked example with stated inputs
Material density reference = Lead; Shape = Sphere; Dimension units = Millimetres (mm); Density (editable override) = 11340 kg/m³; Outside / solid diameter = 50 mm; Quantity = 1 pieces; Optional unit price (0 = omit) = 0 ; Price basis = Price per kg; Cost currency label = USD.
| Output | Computed result |
|---|---|
| Single-piece calculated mass | 0.742201 kg |
| Single-piece mass | 1.636274 lb |
| Quantity | 1 pieces |
| Total mass | 0.742201 kg |
| Total mass in pounds | 1.636274 lb |
| Net model metal volume | 6.544985e-5 m³ |
| Selected shape | Sphere |
| Material reference | Lead |
| Density entered | 11,340 kg/m³ |
| Calculation basis | Geometry × supplied density |
Dimensioned weight examples in kg
| Scenario | Dimension set / calculation basis | Result |
|---|---|---|
| 25 mm | Outside / solid diameter | 0.092775 kg |
| 37.5 mm | Outside / solid diameter | 0.313116 kg |
| 50 mm | Outside / solid diameter | 0.742201 kg |
| 75 mm | Outside / solid diameter | 2.504929 kg |
| 100 mm | Outside / solid diameter | 5.93761 kg |
| 150 mm | Outside / solid diameter | 20.039434 kg |
Unchanged inputs use: Material density reference = Lead; Shape = Sphere; Dimension units = Millimetres (mm); Density (editable override) = 11340 kg/m³; Outside / solid diameter = 50 mm; Quantity = 1 pieces; Optional unit price (0 = omit) = 0 ; Price basis = Price per kg; Cost currency label = USD. Results retain the model limitations described above.
Common questions
What density does this material weight calculator use?
Lead starts at 11340 kg/m³. Rounded from the elemental density of 11.342 g/cm3. Antimonial and other lead alloys need separate data. Reference basis: Elemental lead, rounded.
What is the lead sphere weight calculation formula?
V = πd³/6; mass = density × V. The initial density is 11340 kg/m³ for Elemental lead, rounded. The dimensioned examples on this page show the resulting piece mass; quantity and optional unit price are applied separately.
How do I calculate weight in kg and lbs?
The dimensional model gives metal volume in m³, multiplied by the entered kg/m³ density. One avoirdupois pound is exactly 0.45359237 kg. The result reports kg and lb; these are mass units, while force weight would require a gravitational acceleration.
Can I get weight per meter and per foot?
Uniform bars, pipes and section-area models report kg/m and lb/ft. One foot is exactly 0.3048 m. Area and nonuniform objects instead use their stated geometry; a sphere or coil does not have a meaningful generic straight-stock kg/m.
Does this work for a hollow ball?
No. Subtract a separately calculated inner sphere volume or use a validated shell drawing.
Is a casting pattern diameter the finished diameter?
Not necessarily. Machining stock and casting shrinkage are manufacturing inputs, not automatic allowances here.
Can I export this calculation to Excel?
Calculate first, then choose Export CSV. The CSV contains the submitted model and inputs plus piece mass, total mass and applicable unit weights. Excel can open this text format; it is not a downloadable formula workbook or desktop application.
Does optional price include shipping or fabrication?
No. Enter a price per kg or per lb in the chosen currency label. The total is material mass times that unit price only, with no exchange-rate lookup, tax, minimum order, cutting loss or fabrication labor.
How should I read the calculated tables?
Each table states its geometry, material density and assumptions. Example dimensions are calculation scenarios unless explicitly identified as sourced nominal presets. They are not an inventory list or tolerance guarantee.
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, certified tolerances or proprietary performance ratings.
- OpenStax College Physics 2e, 11.2 Density: mass, volume and density relationshiphttps://openstax.org/books/college-physics-2e/pages/11-2-density
- NIST SP 811, Appendix B.9: mass, length and derived-unit conversionshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9
- NIH PubChem: periodic-table density data, leadhttps://pubchem.ncbi.nlm.nih.gov/periodic-table/density/