Metal Weight CalculatorMaterials, shapes & unit weights

Metal weight calculators / Copper alloys combinations

Metal by dimension. Mass by calculation.

Copper Square Bar Weight Calculator

Calculate copper square bar weight from actual dimensions, density and quantity. Read kg, lb and applicable unit weights, with an optional material-cost estimate.

Your material & dimensions

kg/m³
mm
mm
pieces

Preset densities are editable reference estimates. Dimensions use the selected mm/in unit. Published kg/m presets use their source mass directly; choose Custom dimensions to edit their geometry. Initial inputs are examples.

Reset

Your result

Ready to calculate

Enter your values and press Calculate. The result will open on the calculation page.

Published references · Clear assumptions · No sign-up

The method

Formula and calculation steps

A = side²; mass = density × A × length.

Calculate copper square bar weight from actual dimensions, density and quantity. Read kg, lb and applicable unit weights, with an optional material-cost estimate.

  1. Select a material reference, shape and a consistent dimension unit.
  2. Confirm metal density, actual dimensions and whether a nominal source preset applies.
  3. Submit the form, then interpret the result with the assumptions and limits below.

Solid square prism without rounded corners or chamfers. All dimensions are nominal or user supplied; use a scale or certified product data for shipping, billing and final procurement.

Copper Square Bar: dimensions, density and unit-weight formula

Copper starts at 8960 kg/m³. Elemental copper reference; copper alloys and commercial product conditions can differ. Reference basis: Elemental copper at/near room temperature.

Use the actual solid square side. A hollow square section needs both its outside size and wall thickness and is handled by the SHS tool instead.

For copper square bar weight, keep a single physical piece definition: separate lengths, product counts and voids before multiplying. Convert dimensions consistently; millimetre volume scales by 10⁻⁹ to m³, while cubic inches use 0.0254³. Nominal designation and measured dimension are different inputs. Verify the drawing or product specification before interpreting a calculated total.

Check the numbers

Copper Square Bar Weight Calculator: calculated examples

These results are calculated from the dimensions or published-mass records stated in each row. They are not a complete inventory, certified tolerance table or structural design.

Worked example with stated inputs

Material density reference = Copper; Shape = Square Bar; Dimension units = Millimetres (mm); Density (editable override) = 8960 kg/m³; Overall width / first side = 50 mm; Piece / sidewall length = 1000 mm; Quantity = 1 pieces; Optional unit price (0 = omit) = 0 ; Price basis = Price per kg; Cost currency label = USD.

OutputComputed result
Single-piece calculated mass22.4 kg
Single-piece mass49.383547 lb
Quantity1 pieces
Total mass22.4 kg
Total mass in pounds49.383547 lb
Linear mass22.4 kg/m
Linear mass in imperial units15.052105 lb/ft
Net model metal volume0.0025 m³
Selected shapeSquare Bar
Material referenceCopper
Density entered8,960 kg/m³
Calculation basisGeometry × supplied density

Dimensioned weight examples in kg

ScenarioDimension set / calculation basisResult
500 mmPiece / sidewall length11.2 kg
750 mmPiece / sidewall length16.8 kg
1000 mmPiece / sidewall length22.4 kg
1500 mmPiece / sidewall length33.6 kg
2000 mmPiece / sidewall length44.8 kg
3000 mmPiece / sidewall length67.2 kg

Unchanged inputs use: Material density reference = Copper; Shape = Square Bar; Dimension units = Millimetres (mm); Density (editable override) = 8960 kg/m³; Overall width / first side = 50 mm; Piece / sidewall length = 1000 mm; Quantity = 1 pieces; Optional unit price (0 = omit) = 0 ; Price basis = Price per kg; Cost currency label = USD. Results retain the model limitations described above.

Common questions

What density does this material weight calculator use?

Copper starts at 8960 kg/m³. Elemental copper reference; copper alloys and commercial product conditions can differ. Reference basis: Elemental copper at/near room temperature.

What is the copper square bar weight calculation formula?

A = side²; mass = density × A × length. The initial density is 8960 kg/m³ for Elemental copper at/near room temperature. The dimensioned examples on this page show the resulting piece mass; quantity and optional unit price are applied separately.

How do I calculate weight in kg and lbs?

The dimensional model gives metal volume in m³, multiplied by the entered kg/m³ density. One avoirdupois pound is exactly 0.45359237 kg. The result reports kg and lb; these are mass units, while force weight would require a gravitational acceleration.

Can I get weight per meter and per foot?

Uniform bars, pipes and section-area models report kg/m and lb/ft. One foot is exactly 0.3048 m. Area and nonuniform objects instead use their stated geometry; a sphere or coil does not have a meaningful generic straight-stock kg/m.

Is a square bar the same as a box section?

No. This is solid. Use SHS for hollow material.

Does the table include corner radii?

No. Every table states a sharp-corner geometric example, so rolled or machined corner details need a measured area.

Can I export this calculation to Excel?

Calculate first, then choose Export CSV. The CSV contains the submitted model and inputs plus piece mass, total mass and applicable unit weights. Excel can open this text format; it is not a downloadable formula workbook or desktop application.

Does optional price include shipping or fabrication?

No. Enter a price per kg or per lb in the chosen currency label. The total is material mass times that unit price only, with no exchange-rate lookup, tax, minimum order, cutting loss or fabrication labor.

How should I read the calculated tables?

Each table states its geometry, material density and assumptions. Example dimensions are calculation scenarios unless explicitly identified as sourced nominal presets. They are not an inventory list or tolerance guarantee.

Formula sources and references

References support the underlying methods and units. Chosen example inputs are not universal recommendations, certified tolerances or proprietary performance ratings.

  • OpenStax College Physics 2e, 11.2 Density: mass, volume and density relationshiphttps://openstax.org/books/college-physics-2e/pages/11-2-density
  • NIST SP 811, Appendix B.9: mass, length and derived-unit conversionshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9
  • NIST SRD 71 Users Guide, Table A.3: elemental solids at/near room temperaturehttps://www.nist.gov/system/files/documents/srd/SRD71UsersGuideV1-2.pdf