Metal weight calculators / Coated steel combinations
Metal by dimension. Mass by calculation.
GI Angle Weight Calculator
Calculate gi angle weight from actual dimensions, density and quantity. Read kg, lb and applicable unit weights, with an optional material-cost estimate.
Your material & dimensions
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
A = t(B + H − t); mass = density × A × length.
Calculate gi angle weight from actual dimensions, density and quantity. Read kg, lb and applicable unit weights, with an optional material-cost estimate.
- Select a material reference, shape and a consistent dimension unit.
- Confirm metal density, actual dimensions and whether a nominal source preset applies.
- Submit the form, then interpret the result with the assumptions and limits below.
Fabricated sharp-corner angle estimate. For rolled IS 808 ISA sections use the sourced nominal-mass tool. All dimensions are nominal or user supplied; use a scale or certified product data for shipping, billing and final procurement.
Galvanized Steel (GI) Angle: dimensions, density and unit-weight formula
Galvanized Steel (GI) starts at 7850 kg/m³. This is the steel substrate only. Add coating mass separately; do not treat galvanized steel as a homogeneous metal at one universal density. Reference basis: Steel base; zinc coating excluded.
Two rectangular legs share a square corner. Subtract the overlap once. Equal and unequal legs can be entered, but root fillets and rounded toes are not described by the sharp-corner area.
For gi angle weight, keep a single physical piece definition: separate lengths, product counts and voids before multiplying. Convert dimensions consistently; millimetre volume scales by 10⁻⁹ to m³, while cubic inches use 0.0254³. Nominal designation and measured dimension are different inputs. Verify the drawing or product specification before interpreting a calculated total.
Continue with: GI C Purlin Weight Calculator · GI Channel Weight Calculator · GI Corrugated Sheet Weight Calculator · GI Flat Bar Weight Calculator
Check the numbers
GI Angle Weight Calculator: calculated examples
These results are calculated from the dimensions or published-mass records stated in each row. They are not a complete inventory, certified tolerance table or structural design.
Worked example with stated inputs
Material density reference = Galvanized Steel (GI); Shape = Angle; Dimension units = Millimetres (mm); Density (editable override) = 7850 kg/m³; First leg outside size = 75 mm; Second leg outside size = 75 mm; Uniform leg thickness = 6 mm; Piece / sidewall length = 1000 mm; Quantity = 1 pieces; Optional unit price (0 = omit) = 0 ; Price basis = Price per kg; Cost currency label = USD.
| Output | Computed result |
|---|---|
| Single-piece calculated mass | 6.7824 kg |
| Single-piece mass | 14.952632 lb |
| Quantity | 1 pieces |
| Total mass | 6.7824 kg |
| Total mass in pounds | 14.952632 lb |
| Linear mass | 6.7824 kg/m |
| Linear mass in imperial units | 4.557562 lb/ft |
| Net model metal volume | 0.000864 m³ |
| Selected shape | Angle |
| Material reference | Galvanized Steel (GI) |
| Density entered | 7,850 kg/m³ |
| Calculation basis | Geometry × supplied density |
Dimensioned weight examples in kg
| Scenario | Dimension set / calculation basis | Result |
|---|---|---|
| 500 mm | Piece / sidewall length | 3.3912 kg |
| 750 mm | Piece / sidewall length | 5.0868 kg |
| 1000 mm | Piece / sidewall length | 6.7824 kg |
| 1500 mm | Piece / sidewall length | 10.1736 kg |
| 2000 mm | Piece / sidewall length | 13.5648 kg |
| 3000 mm | Piece / sidewall length | 20.3472 kg |
Unchanged inputs use: Material density reference = Galvanized Steel (GI); Shape = Angle; Dimension units = Millimetres (mm); Density (editable override) = 7850 kg/m³; First leg outside size = 75 mm; Second leg outside size = 75 mm; Uniform leg thickness = 6 mm; Piece / sidewall length = 1000 mm; Quantity = 1 pieces; Optional unit price (0 = omit) = 0 ; Price basis = Price per kg; Cost currency label = USD. Results retain the model limitations described above.
Common questions
What density does this material weight calculator use?
Galvanized Steel (GI) starts at 7850 kg/m³. This is the steel substrate only. Add coating mass separately; do not treat galvanized steel as a homogeneous metal at one universal density. Reference basis: Steel base; zinc coating excluded.
What is the gi angle weight calculation formula?
A = t(B + H − t); mass = density × A × length. The initial density is 7850 kg/m³ for Steel base; zinc coating excluded. The dimensioned examples on this page show the resulting piece mass; quantity and optional unit price are applied separately.
Does GI density include the zinc coating?
No. The default 7850 kg/m³ describes the steel substrate. GI pipes, wire and sheet may include zinc, lining or other additions. Add a separately verified coating mass or use the finished product’s measured density/mass; no universal coating is assumed.
How do I calculate weight in kg and lbs?
The dimensional model gives metal volume in m³, multiplied by the entered kg/m³ density. One avoirdupois pound is exactly 0.45359237 kg. The result reports kg and lb; these are mass units, while force weight would require a gravitational acceleration.
Can I get weight per meter and per foot?
Uniform bars, pipes and section-area models report kg/m and lb/ft. One foot is exactly 0.3048 m. Area and nonuniform objects instead use their stated geometry; a sphere or coil does not have a meaningful generic straight-stock kg/m.
Can this calculate unequal angle weight?
Yes for uniform thickness and sharp corners. Use actual leg dimensions and a consistent thickness.
Why does it differ from an ISA weight chart?
Rolled sections include root and toe geometry plus nominal production conventions. This simple geometry is not a substitute for the published section mass.
Can I export this calculation to Excel?
Calculate first, then choose Export CSV. The CSV contains the submitted model and inputs plus piece mass, total mass and applicable unit weights. Excel can open this text format; it is not a downloadable formula workbook or desktop application.
Does optional price include shipping or fabrication?
No. Enter a price per kg or per lb in the chosen currency label. The total is material mass times that unit price only, with no exchange-rate lookup, tax, minimum order, cutting loss or fabrication labor.
How should I read the calculated tables?
Each table states its geometry, material density and assumptions. Example dimensions are calculation scenarios unless explicitly identified as sourced nominal presets. They are not an inventory list or tolerance guarantee.
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, certified tolerances or proprietary performance ratings.
- OpenStax College Physics 2e, 11.2 Density: mass, volume and density relationshiphttps://openstax.org/books/college-physics-2e/pages/11-2-density
- NIST SP 811, Appendix B.9: mass, length and derived-unit conversionshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9
- SSAB metal-coated steel sheets EPD: steel substrate and separate zinc coatinghttps://vpp.bastaonline.se/Documents/510965/EPD/EPD-Metal_coated_steel_sheets_and_coils.pdf