Metal weight calculators / Coated steel combinations
Metal by dimension. Mass by calculation.
GI Channel Weight Calculator
Calculate gi channel weight from actual dimensions, density and quantity. Read kg, lb and applicable unit weights, with an optional material-cost estimate.
Your material & dimensions
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
I/channel: A = 2Btf + (H−2tf)tw; T: A = Btf + (H−tf)tw; mass = density × A × length.
Calculate gi channel weight from actual dimensions, density and quantity. Read kg, lb and applicable unit weights, with an optional material-cost estimate.
- Select a material reference, shape and a consistent dimension unit.
- Confirm metal density, actual dimensions and whether a nominal source preset applies.
- Submit the form, then interpret the result with the assumptions and limits below.
Sharp-corner fabricated section; excludes rolled fillets, tapered flanges and catalogue tolerances. W, UB, ISMB and ISMC nominal masses require their dedicated source records. All dimensions are nominal or user supplied; use a scale or certified product data for shipping, billing and final procurement.
Galvanized Steel (GI) Channel: dimensions, density and unit-weight formula
Galvanized Steel (GI) starts at 7850 kg/m³. This is the steel substrate only. Add coating mass separately; do not treat galvanized steel as a homogeneous metal at one universal density. Reference basis: Steel base; zinc coating excluded.
The flange and web rectangles are partitioned without overlap. I and channel sections can share a geometric area even though their centroids and structural behavior differ. This calculator concerns mass only and does not compute bending strength, buckling or safe load.
For gi channel weight, keep a single physical piece definition: separate lengths, product counts and voids before multiplying. Convert dimensions consistently; millimetre volume scales by 10⁻⁹ to m³, while cubic inches use 0.0254³. Nominal designation and measured dimension are different inputs. Verify the drawing or product specification before interpreting a calculated total.
Continue with: GI Angle Weight Calculator · GI C Purlin Weight Calculator · GI Corrugated Sheet Weight Calculator · GI Flat Bar Weight Calculator
Check the numbers
GI Channel Weight Calculator: calculated examples
These results are calculated from the dimensions or published-mass records stated in each row. They are not a complete inventory, certified tolerance table or structural design.
Worked example with stated inputs
Material density reference = Galvanized Steel (GI); Shape = Channel; Dimension units = Millimetres (mm); Density (editable override) = 7850 kg/m³; Overall section depth = 200 mm; Flange width = 100 mm; Web thickness = 6 mm; Flange thickness = 10 mm; Piece / sidewall length = 1000 mm; Quantity = 1 pieces; Optional unit price (0 = omit) = 0 ; Price basis = Price per kg; Cost currency label = USD.
| Output | Computed result |
|---|---|
| Single-piece calculated mass | 24.178 kg |
| Single-piece mass | 53.303366 lb |
| Quantity | 1 pieces |
| Total mass | 24.178 kg |
| Total mass in pounds | 53.303366 lb |
| Linear mass | 24.178 kg/m |
| Linear mass in imperial units | 16.246866 lb/ft |
| Net model metal volume | 0.00308 m³ |
| Selected shape | Channel |
| Material reference | Galvanized Steel (GI) |
| Density entered | 7,850 kg/m³ |
| Calculation basis | Geometry × supplied density |
Dimensioned weight examples in kg
| Scenario | Dimension set / calculation basis | Result |
|---|---|---|
| 500 mm | Piece / sidewall length | 12.089 kg |
| 750 mm | Piece / sidewall length | 18.1335 kg |
| 1000 mm | Piece / sidewall length | 24.178 kg |
| 1500 mm | Piece / sidewall length | 36.267 kg |
| 2000 mm | Piece / sidewall length | 48.356 kg |
| 3000 mm | Piece / sidewall length | 72.534 kg |
Unchanged inputs use: Material density reference = Galvanized Steel (GI); Shape = Channel; Dimension units = Millimetres (mm); Density (editable override) = 7850 kg/m³; Overall section depth = 200 mm; Flange width = 100 mm; Web thickness = 6 mm; Flange thickness = 10 mm; Piece / sidewall length = 1000 mm; Quantity = 1 pieces; Optional unit price (0 = omit) = 0 ; Price basis = Price per kg; Cost currency label = USD. Results retain the model limitations described above.
Common questions
What density does this material weight calculator use?
Galvanized Steel (GI) starts at 7850 kg/m³. This is the steel substrate only. Add coating mass separately; do not treat galvanized steel as a homogeneous metal at one universal density. Reference basis: Steel base; zinc coating excluded.
What is the gi channel weight calculation formula?
I/channel: A = 2Btf + (H−2tf)tw; T: A = Btf + (H−tf)tw; mass = density × A × length. The initial density is 7850 kg/m³ for Steel base; zinc coating excluded. The dimensioned examples on this page show the resulting piece mass; quantity and optional unit price are applied separately.
Does GI density include the zinc coating?
No. The default 7850 kg/m³ describes the steel substrate. GI pipes, wire and sheet may include zinc, lining or other additions. Add a separately verified coating mass or use the finished product’s measured density/mass; no universal coating is assumed.
How do I calculate weight in kg and lbs?
The dimensional model gives metal volume in m³, multiplied by the entered kg/m³ density. One avoirdupois pound is exactly 0.45359237 kg. The result reports kg and lb; these are mass units, while force weight would require a gravitational acceleration.
Can I get weight per meter and per foot?
Uniform bars, pipes and section-area models report kg/m and lb/ft. One foot is exactly 0.3048 m. Area and nonuniform objects instead use their stated geometry; a sphere or coil does not have a meaningful generic straight-stock kg/m.
Is this an I-beam load calculator?
No. Equal mass does not imply equal strength or stiffness. No span, restraint, load combination or material strength check is performed.
Can I use it for rolled standard sections?
Use the catalogue-area or nominal-mass tools for those. Simplified flange and web rectangles omit fillets and may not match a standard chart.
Can I export this calculation to Excel?
Calculate first, then choose Export CSV. The CSV contains the submitted model and inputs plus piece mass, total mass and applicable unit weights. Excel can open this text format; it is not a downloadable formula workbook or desktop application.
Does optional price include shipping or fabrication?
No. Enter a price per kg or per lb in the chosen currency label. The total is material mass times that unit price only, with no exchange-rate lookup, tax, minimum order, cutting loss or fabrication labor.
How should I read the calculated tables?
Each table states its geometry, material density and assumptions. Example dimensions are calculation scenarios unless explicitly identified as sourced nominal presets. They are not an inventory list or tolerance guarantee.
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, certified tolerances or proprietary performance ratings.
- OpenStax College Physics 2e, 11.2 Density: mass, volume and density relationshiphttps://openstax.org/books/college-physics-2e/pages/11-2-density
- NIST SP 811, Appendix B.9: mass, length and derived-unit conversionshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9
- SSAB metal-coated steel sheets EPD: steel substrate and separate zinc coatinghttps://vpp.bastaonline.se/Documents/510965/EPD/EPD-Metal_coated_steel_sheets_and_coils.pdf