Metal weight calculators / Steel combinations
Metal by dimension. Mass by calculation.
MS Section Weight Calculator
Calculate ms section weight from actual dimensions, density and quantity. Read kg, lb and applicable unit weights, with an optional material-cost estimate.
Your material & dimensions
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
Mass = metal section area × cut length × density.
Calculate ms section weight from actual dimensions, density and quantity. Read kg, lb and applicable unit weights, with an optional material-cost estimate.
- Select a material reference, shape and a consistent dimension unit.
- Confirm metal density, actual dimensions and whether a nominal source preset applies.
- Submit the form, then interpret the result with the assumptions and limits below.
Requires a verified material area; does not derive arbitrary profiles, rolled-section properties or safe loads. All dimensions are nominal or user supplied; use a scale or certified product data for shipping, billing and final procurement.
Mild Steel (MS) Section Area: dimensions, density and unit-weight formula
Mild Steel (MS) starts at 7850 kg/m³. MS means mild steel, not stainless steel. This structural-steel estimate does not certify a particular mild-steel product. Reference basis: Representative structural steel.
Use the actual metal cross-section area from a supplier or a validated drawing. It includes fillets, hollows and extrusion details when those are already included in the area. A bounding rectangle or outer silhouette is not necessarily the metal area.
For ms section weight, keep a single physical piece definition: separate lengths, product counts and voids before multiplying. Convert dimensions consistently; millimetre volume scales by 10⁻⁹ to m³, while cubic inches use 0.0254³. Nominal designation and measured dimension are different inputs. Verify the drawing or product specification before interpreting a calculated total.
Continue with: A36 Steel Plate Weight Calculator · Alloy Steel Pipe Weight Calculator · Alloy Steel Volume Weight Calculator · Carbon Steel Angle Weight Calculator
Check the numbers
MS Section Weight Calculator: calculated examples
These results are calculated from the dimensions or published-mass records stated in each row. They are not a complete inventory, certified tolerance table or structural design.
Worked example with stated inputs
Material density reference = Mild Steel (MS); Shape = Section Area; Dimension units = Millimetres (mm); Density (editable override) = 7850 kg/m³; Published / measured metal cross-section area = 1000 mm²; Piece / sidewall length = 1000 mm; Quantity = 1 pieces; Optional unit price (0 = omit) = 0 ; Price basis = Price per kg; Cost currency label = USD.
| Output | Computed result |
|---|---|
| Single-piece calculated mass | 7.85 kg |
| Single-piece mass | 17.306288 lb |
| Quantity | 1 pieces |
| Total mass | 7.85 kg |
| Total mass in pounds | 17.306288 lb |
| Linear mass | 7.85 kg/m |
| Linear mass in imperial units | 5.274956 lb/ft |
| Net model metal volume | 0.001 m³ |
| Selected shape | Section Area |
| Material reference | Mild Steel (MS) |
| Density entered | 7,850 kg/m³ |
| Calculation basis | Geometry × supplied density |
Dimensioned weight examples in kg
| Scenario | Dimension set / calculation basis | Result |
|---|---|---|
| 500 mm | Piece / sidewall length | 3.925 kg |
| 750 mm | Piece / sidewall length | 5.8875 kg |
| 1000 mm | Piece / sidewall length | 7.85 kg |
| 1500 mm | Piece / sidewall length | 11.775 kg |
| 2000 mm | Piece / sidewall length | 15.7 kg |
| 3000 mm | Piece / sidewall length | 23.55 kg |
Unchanged inputs use: Material density reference = Mild Steel (MS); Shape = Section Area; Dimension units = Millimetres (mm); Density (editable override) = 7850 kg/m³; Published / measured metal cross-section area = 1000 mm²; Piece / sidewall length = 1000 mm; Quantity = 1 pieces; Optional unit price (0 = omit) = 0 ; Price basis = Price per kg; Cost currency label = USD. Results retain the model limitations described above.
Common questions
What density does this material weight calculator use?
Mild Steel (MS) starts at 7850 kg/m³. MS means mild steel, not stainless steel. This structural-steel estimate does not certify a particular mild-steel product. Reference basis: Representative structural steel.
What is the ms section weight calculation formula?
Mass = metal section area × cut length × density. The initial density is 7850 kg/m³ for Representative structural steel. The dimensioned examples on this page show the resulting piece mass; quantity and optional unit price are applied separately.
How do I calculate weight in kg and lbs?
The dimensional model gives metal volume in m³, multiplied by the entered kg/m³ density. One avoirdupois pound is exactly 0.45359237 kg. The result reports kg and lb; these are mass units, while force weight would require a gravitational acceleration.
Can I get weight per meter and per foot?
Uniform bars, pipes and section-area models report kg/m and lb/ft. One foot is exactly 0.3048 m. Area and nonuniform objects instead use their stated geometry; a sphere or coil does not have a meaningful generic straight-stock kg/m.
Can I use a standard section area from a catalogue?
Yes, provided its units, metal grade and definition are correct. Published nominal kg/m can differ slightly because area and mass may be independently rounded.
What about an aluminum extrusion or conductor cable?
Enter the sum of its true metal areas. Separate different materials, voids and insulation, and account for nonstraight lay paths when applicable.
Can I export this calculation to Excel?
Calculate first, then choose Export CSV. The CSV contains the submitted model and inputs plus piece mass, total mass and applicable unit weights. Excel can open this text format; it is not a downloadable formula workbook or desktop application.
Does optional price include shipping or fabrication?
No. Enter a price per kg or per lb in the chosen currency label. The total is material mass times that unit price only, with no exchange-rate lookup, tax, minimum order, cutting loss or fabrication labor.
How should I read the calculated tables?
Each table states its geometry, material density and assumptions. Example dimensions are calculation scenarios unless explicitly identified as sourced nominal presets. They are not an inventory list or tolerance guarantee.
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, certified tolerances or proprietary performance ratings.
- OpenStax College Physics 2e, 11.2 Density: mass, volume and density relationshiphttps://openstax.org/books/college-physics-2e/pages/11-2-density
- NIST SP 811, Appendix B.9: mass, length and derived-unit conversionshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9
- SSAB structural hollow sections EPD: steel densityhttps://websitecdn.ssab.com/-/media/Files/EN/Support/Certificates/Hollow-Sections/Environmental-product-declaration---EN-EPD-SSAB-tubes-sections-piles.pdf