Metal weight calculators / Steel combinations
Metal by dimension. Mass by calculation.
MS Hex Bar Weight Calculator
Calculate ms hex bar weight from actual dimensions, density and quantity. Read kg, lb and applicable unit weights, with an optional material-cost estimate.
Your material & dimensions
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
A = √3 × across-flats² / 2; mass = density × A × length.
Calculate ms hex bar weight from actual dimensions, density and quantity. Read kg, lb and applicable unit weights, with an optional material-cost estimate.
- Select a material reference, shape and a consistent dimension unit.
- Confirm metal density, actual dimensions and whether a nominal source preset applies.
- Submit the form, then interpret the result with the assumptions and limits below.
Regular solid hexagon; no chamfer allowance. All dimensions are nominal or user supplied; use a scale or certified product data for shipping, billing and final procurement.
Mild Steel (MS) Hex Bar: dimensions, density and unit-weight formula
Mild Steel (MS) starts at 7850 kg/m³. MS means mild steel, not stainless steel. This structural-steel estimate does not certify a particular mild-steel product. Reference basis: Representative structural steel.
The input is the distance between opposite parallel faces, not the distance across opposite corners. A regular hexagon can be divided into six equal triangles to obtain its area.
For ms hex bar weight, keep a single physical piece definition: separate lengths, product counts and voids before multiplying. Convert dimensions consistently; millimetre volume scales by 10⁻⁹ to m³, while cubic inches use 0.0254³. Nominal designation and measured dimension are different inputs. Verify the drawing or product specification before interpreting a calculated total.
Continue with: A36 Steel Plate Weight Calculator · Alloy Steel Pipe Weight Calculator · Alloy Steel Volume Weight Calculator · Carbon Steel Angle Weight Calculator
Check the numbers
MS Hex Bar Weight Calculator: calculated examples
These results are calculated from the dimensions or published-mass records stated in each row. They are not a complete inventory, certified tolerance table or structural design.
Worked example with stated inputs
Material density reference = Mild Steel (MS); Shape = Hex Bar; Dimension units = Millimetres (mm); Density (editable override) = 7850 kg/m³; Across-flats size = 25 mm; Piece / sidewall length = 1000 mm; Quantity = 1 pieces; Optional unit price (0 = omit) = 0 ; Price basis = Price per kg; Cost currency label = USD.
| Output | Computed result |
|---|---|
| Single-piece calculated mass | 4.248937 kg |
| Single-piece mass | 9.367303 lb |
| Quantity | 1 pieces |
| Total mass | 4.248937 kg |
| Total mass in pounds | 9.367303 lb |
| Linear mass | 4.248937 kg/m |
| Linear mass in imperial units | 2.855154 lb/ft |
| Net model metal volume | 0.000541 m³ |
| Selected shape | Hex Bar |
| Material reference | Mild Steel (MS) |
| Density entered | 7,850 kg/m³ |
| Calculation basis | Geometry × supplied density |
Dimensioned weight examples in kg
| Scenario | Dimension set / calculation basis | Result |
|---|---|---|
| 500 mm | Piece / sidewall length | 2.124469 kg |
| 750 mm | Piece / sidewall length | 3.186703 kg |
| 1000 mm | Piece / sidewall length | 4.248937 kg |
| 1500 mm | Piece / sidewall length | 6.373406 kg |
| 2000 mm | Piece / sidewall length | 8.497874 kg |
| 3000 mm | Piece / sidewall length | 12.746811 kg |
Unchanged inputs use: Material density reference = Mild Steel (MS); Shape = Hex Bar; Dimension units = Millimetres (mm); Density (editable override) = 7850 kg/m³; Across-flats size = 25 mm; Piece / sidewall length = 1000 mm; Quantity = 1 pieces; Optional unit price (0 = omit) = 0 ; Price basis = Price per kg; Cost currency label = USD. Results retain the model limitations described above.
Common questions
What density does this material weight calculator use?
Mild Steel (MS) starts at 7850 kg/m³. MS means mild steel, not stainless steel. This structural-steel estimate does not certify a particular mild-steel product. Reference basis: Representative structural steel.
What is the ms hex bar weight calculation formula?
A = √3 × across-flats² / 2; mass = density × A × length. The initial density is 7850 kg/m³ for Representative structural steel. The dimensioned examples on this page show the resulting piece mass; quantity and optional unit price are applied separately.
How do I calculate weight in kg and lbs?
The dimensional model gives metal volume in m³, multiplied by the entered kg/m³ density. One avoirdupois pound is exactly 0.45359237 kg. The result reports kg and lb; these are mass units, while force weight would require a gravitational acceleration.
Can I get weight per meter and per foot?
Uniform bars, pipes and section-area models report kg/m and lb/ft. One foot is exactly 0.3048 m. Area and nonuniform objects instead use their stated geometry; a sphere or coil does not have a meaningful generic straight-stock kg/m.
Can I enter across-corners diameter?
No. Across corners equals across flats divided by cos(30 degrees). Convert it before using this form.
Why is the table not a round-bar table?
A hexagon has a different section-area coefficient. Equal across-flats and round diameters do not imply equal areas.
Can I export this calculation to Excel?
Calculate first, then choose Export CSV. The CSV contains the submitted model and inputs plus piece mass, total mass and applicable unit weights. Excel can open this text format; it is not a downloadable formula workbook or desktop application.
Does optional price include shipping or fabrication?
No. Enter a price per kg or per lb in the chosen currency label. The total is material mass times that unit price only, with no exchange-rate lookup, tax, minimum order, cutting loss or fabrication labor.
How should I read the calculated tables?
Each table states its geometry, material density and assumptions. Example dimensions are calculation scenarios unless explicitly identified as sourced nominal presets. They are not an inventory list or tolerance guarantee.
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, certified tolerances or proprietary performance ratings.
- OpenStax College Physics 2e, 11.2 Density: mass, volume and density relationshiphttps://openstax.org/books/college-physics-2e/pages/11-2-density
- NIST SP 811, Appendix B.9: mass, length and derived-unit conversionshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9
- SSAB structural hollow sections EPD: steel densityhttps://websitecdn.ssab.com/-/media/Files/EN/Support/Certificates/Hollow-Sections/Environmental-product-declaration---EN-EPD-SSAB-tubes-sections-piles.pdf