Metal weight calculators / Steel combinations
Metal by dimension. Mass by calculation.
Steel Coil Weight Calculator
Calculate steel coil weight from actual dimensions, density and quantity. Read kg, lb and applicable unit weights, with an optional material-cost estimate.
Your material & dimensions
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
Vmetal = π(OD²−ID²) × coil width × packing fraction /4; mass = density × Vmetal.
Calculate steel coil weight from actual dimensions, density and quantity. Read kg, lb and applicable unit weights, with an optional material-cost estimate.
- Select a material reference, shape and a consistent dimension unit.
- Confirm metal density, actual dimensions and whether a nominal source preset applies.
- Submit the form, then interpret the result with the assumptions and limits below.
Annular-envelope estimate only. Core, wrapping, straps, oil and packaging are excluded. All dimensions are nominal or user supplied; use a scale or certified product data for shipping, billing and final procurement.
Steel Coil: dimensions, density and unit-weight formula
Steel starts at 7850 kg/m³. A conventional structural-steel estimate. Select the actual alloy or enter certified density when known. Reference basis: Representative structural steel.
The annular envelope represents the occupied winding space. A packing fraction describes the share occupied by metal rather than gaps. It is distinct from strip thickness; a strip-length calculation would instead use strip width, thickness and uncoiled length.
For steel coil weight, keep a single physical piece definition: separate lengths, product counts and voids before multiplying. Convert dimensions consistently; millimetre volume scales by 10⁻⁹ to m³, while cubic inches use 0.0254³. Nominal designation and measured dimension are different inputs. Verify the drawing or product specification before interpreting a calculated total.
Continue with: A36 Steel Plate Weight Calculator · Alloy Steel Pipe Weight Calculator · Alloy Steel Volume Weight Calculator · Carbon Steel Angle Weight Calculator
Check the numbers
Steel Coil Weight Calculator: calculated examples
These results are calculated from the dimensions or published-mass records stated in each row. They are not a complete inventory, certified tolerance table or structural design.
Worked example with stated inputs
Material density reference = Steel; Shape = Coil; Dimension units = Millimetres (mm); Density (editable override) = 7850 kg/m³; Coil outside diameter = 1000 mm; Coil inside diameter = 508 mm; Coil axial width = 1000 mm; Metal packing fraction = 0.98 ratio; Quantity = 1 pieces; Optional unit price (0 = omit) = 0 ; Price basis = Price per kg; Cost currency label = USD.
| Output | Computed result |
|---|---|
| Single-piece calculated mass | 4,482.827816 kg |
| Single-piece mass | 9,882.943614 lb |
| Quantity | 1 pieces |
| Total mass | 4,482.827816 kg |
| Total mass in pounds | 9,882.943614 lb |
| Net model metal volume | 0.571061 m³ |
| Selected shape | Coil |
| Material reference | Steel |
| Density entered | 7,850 kg/m³ |
| Calculation basis | Geometry × supplied density |
Dimensioned weight examples in kg
| Scenario | Dimension set / calculation basis | Result |
|---|---|---|
| 500 mm | Coil axial width | 2,241.413908 kg |
| 750 mm | Coil axial width | 3,362.120862 kg |
| 1000 mm | Coil axial width | 4,482.827816 kg |
| 1500 mm | Coil axial width | 6,724.241725 kg |
| 2000 mm | Coil axial width | 8,965.655633 kg |
| 3000 mm | Coil axial width | 13,448.483449 kg |
Unchanged inputs use: Material density reference = Steel; Shape = Coil; Dimension units = Millimetres (mm); Density (editable override) = 7850 kg/m³; Coil outside diameter = 1000 mm; Coil inside diameter = 508 mm; Coil axial width = 1000 mm; Metal packing fraction = 0.98 ratio; Quantity = 1 pieces; Optional unit price (0 = omit) = 0 ; Price basis = Price per kg; Cost currency label = USD. Results retain the model limitations described above.
Common questions
What density does this material weight calculator use?
Steel starts at 7850 kg/m³. A conventional structural-steel estimate. Select the actual alloy or enter certified density when known. Reference basis: Representative structural steel.
What is the steel coil weight calculation formula?
Vmetal = π(OD²−ID²) × coil width × packing fraction /4; mass = density × Vmetal. The initial density is 7850 kg/m³ for Representative structural steel. The dimensioned examples on this page show the resulting piece mass; quantity and optional unit price are applied separately.
How do I calculate weight in kg and lbs?
The dimensional model gives metal volume in m³, multiplied by the entered kg/m³ density. One avoirdupois pound is exactly 0.45359237 kg. The result reports kg and lb; these are mass units, while force weight would require a gravitational acceleration.
Can I get weight per meter and per foot?
Uniform bars, pipes and section-area models report kg/m and lb/ft. One foot is exactly 0.3048 m. Area and nonuniform objects instead use their stated geometry; a sphere or coil does not have a meaningful generic straight-stock kg/m.
Does strip thickness appear in this coil formula?
Not in the annular-envelope method. Thickness and pitch affect packing and uncoiled length, which this tool does not infer.
Should I enter a steel core as metal?
No. This calculation excludes the inner bore and does not separately add core or packaging mass.
Can I export this calculation to Excel?
Calculate first, then choose Export CSV. The CSV contains the submitted model and inputs plus piece mass, total mass and applicable unit weights. Excel can open this text format; it is not a downloadable formula workbook or desktop application.
Does optional price include shipping or fabrication?
No. Enter a price per kg or per lb in the chosen currency label. The total is material mass times that unit price only, with no exchange-rate lookup, tax, minimum order, cutting loss or fabrication labor.
How should I read the calculated tables?
Each table states its geometry, material density and assumptions. Example dimensions are calculation scenarios unless explicitly identified as sourced nominal presets. They are not an inventory list or tolerance guarantee.
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, certified tolerances or proprietary performance ratings.
- OpenStax College Physics 2e, 11.2 Density: mass, volume and density relationshiphttps://openstax.org/books/college-physics-2e/pages/11-2-density
- NIST SP 811, Appendix B.9: mass, length and derived-unit conversionshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9
- SSAB structural hollow sections EPD: steel densityhttps://websitecdn.ssab.com/-/media/Files/EN/Support/Certificates/Hollow-Sections/Environmental-product-declaration---EN-EPD-SSAB-tubes-sections-piles.pdf