Metal weight calculators / Steel combinations
Metal by dimension. Mass by calculation.
Steel Tank Weight Calculator
Calculate steel tank weight from actual dimensions, density and quantity. Read kg, lb and applicable unit weights, with an optional material-cost estimate.
Your material & dimensions
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
V = π[OD²−(OD−2t)²]L/4 + end count × πOD²t/4.
Calculate steel tank weight from actual dimensions, density and quantity. Read kg, lb and applicable unit weights, with an optional material-cost estimate.
- Select a material reference, shape and a consistent dimension unit.
- Confirm metal density, actual dimensions and whether a nominal source preset applies.
- Submit the form, then interpret the result with the assumptions and limits below.
Dry shell plus 0–2 flat plates only. No contents, domed heads, legs, welds, nozzles, pressure rating or fabrication allowance. All dimensions are nominal or user supplied; use a scale or certified product data for shipping, billing and final procurement.
Steel Cylindrical Tank Shell: dimensions, density and unit-weight formula
Steel starts at 7850 kg/m³. A conventional structural-steel estimate. Select the actual alloy or enter certified density when known. Reference basis: Representative structural steel.
The sidewall is a circular annulus extruded over its straight length. End plates are flat full-diameter discs added beyond that straight length. The stated length excludes the added end thicknesses, which avoids counting their volumes twice.
For steel tank weight, keep a single physical piece definition: separate lengths, product counts and voids before multiplying. Convert dimensions consistently; millimetre volume scales by 10⁻⁹ to m³, while cubic inches use 0.0254³. Nominal designation and measured dimension are different inputs. Verify the drawing or product specification before interpreting a calculated total.
Continue with: A36 Steel Plate Weight Calculator · Alloy Steel Pipe Weight Calculator · Alloy Steel Volume Weight Calculator · Carbon Steel Angle Weight Calculator
Check the numbers
Steel Tank Weight Calculator: calculated examples
These results are calculated from the dimensions or published-mass records stated in each row. They are not a complete inventory, certified tolerance table or structural design.
Worked example with stated inputs
Material density reference = Steel; Shape = Cylindrical Tank Shell; Dimension units = Millimetres (mm); Density (editable override) = 7850 kg/m³; Outside shell diameter = 1000 mm; Shell / flat head thickness = 6 mm; Straight sidewall length = 1500 mm; Number of flat end plates = 2 ends; Quantity = 1 pieces; Optional unit price (0 = omit) = 0 ; Price basis = Price per kg; Cost currency label = USD.
| Output | Computed result |
|---|---|
| Single-piece calculated mass | 294.606307 kg |
| Single-piece mass | 649.495729 lb |
| Quantity | 1 pieces |
| Total mass | 294.606307 kg |
| Total mass in pounds | 649.495729 lb |
| Net model metal volume | 0.037529 m³ |
| Selected shape | Cylindrical Tank Shell |
| Material reference | Steel |
| Density entered | 7,850 kg/m³ |
| Calculation basis | Geometry × supplied density |
Dimensioned weight examples in kg
| Scenario | Dimension set / calculation basis | Result |
|---|---|---|
| 750 mm | Straight sidewall length | 184.295407 kg |
| 1125 mm | Straight sidewall length | 239.450857 kg |
| 1500 mm | Straight sidewall length | 294.606307 kg |
| 2250 mm | Straight sidewall length | 404.917207 kg |
| 3000 mm | Straight sidewall length | 515.228107 kg |
| 4500 mm | Straight sidewall length | 735.849907 kg |
Unchanged inputs use: Material density reference = Steel; Shape = Cylindrical Tank Shell; Dimension units = Millimetres (mm); Density (editable override) = 7850 kg/m³; Outside shell diameter = 1000 mm; Shell / flat head thickness = 6 mm; Straight sidewall length = 1500 mm; Number of flat end plates = 2 ends; Quantity = 1 pieces; Optional unit price (0 = omit) = 0 ; Price basis = Price per kg; Cost currency label = USD. Results retain the model limitations described above.
Common questions
What density does this material weight calculator use?
Steel starts at 7850 kg/m³. A conventional structural-steel estimate. Select the actual alloy or enter certified density when known. Reference basis: Representative structural steel.
What is the steel tank weight calculation formula?
V = π[OD²−(OD−2t)²]L/4 + end count × πOD²t/4. The initial density is 7850 kg/m³ for Representative structural steel. The dimensioned examples on this page show the resulting piece mass; quantity and optional unit price are applied separately.
How do I calculate weight in kg and lbs?
The dimensional model gives metal volume in m³, multiplied by the entered kg/m³ density. One avoirdupois pound is exactly 0.45359237 kg. The result reports kg and lb; these are mass units, while force weight would require a gravitational acceleration.
Can I get weight per meter and per foot?
Uniform bars, pipes and section-area models report kg/m and lb/ft. One foot is exactly 0.3048 m. Area and nonuniform objects instead use their stated geometry; a sphere or coil does not have a meaningful generic straight-stock kg/m.
Does this give water capacity or filled tank weight?
No. It reports dry metal mass. Contents and working capacity require separate geometry and density calculations.
Can it calculate an elliptical or dished head?
No. Those require their true head profile and plate development. Flat plates are explicitly assumed.
Can I export this calculation to Excel?
Calculate first, then choose Export CSV. The CSV contains the submitted model and inputs plus piece mass, total mass and applicable unit weights. Excel can open this text format; it is not a downloadable formula workbook or desktop application.
Does optional price include shipping or fabrication?
No. Enter a price per kg or per lb in the chosen currency label. The total is material mass times that unit price only, with no exchange-rate lookup, tax, minimum order, cutting loss or fabrication labor.
How should I read the calculated tables?
Each table states its geometry, material density and assumptions. Example dimensions are calculation scenarios unless explicitly identified as sourced nominal presets. They are not an inventory list or tolerance guarantee.
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, certified tolerances or proprietary performance ratings.
- OpenStax College Physics 2e, 11.2 Density: mass, volume and density relationshiphttps://openstax.org/books/college-physics-2e/pages/11-2-density
- NIST SP 811, Appendix B.9: mass, length and derived-unit conversionshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9
- SSAB structural hollow sections EPD: steel densityhttps://websitecdn.ssab.com/-/media/Files/EN/Support/Certificates/Hollow-Sections/Environmental-product-declaration---EN-EPD-SSAB-tubes-sections-piles.pdf